King GTS38: Tri Axle Stepframe trailer

King GTS38

  • King GTS38
  • King GTS38
  • King GTS38
  • King GTS38
  • King GTS38
  • King GTS38
  • King GTS38
  • King GTS38
  • King GTS38
  • King GTS38
  • King GTS38
  • King GTS38
  • King GTS38
  • King GTS38
  • King GTS38
  • King GTS38
  • King GTS38
  • King GTS38
  • King GTS38
  • King GTS38

Direct Sales

Product ID: 87905


Heavy duty plant stepframe trailer 

215/75 R17.5 

2002 

Very Good 

£P.O.A 
Subject to UK VAT unless sold outside of the EU

Just released, direct from the MoD & in very good condition, King GTS38 Tri Axle Stepframe trailer. Built to a high specification, with many extras.

It features:
3 x 8 tonne (design) axles with air suspension and raise/lower facility.  
Hydraulically operated flip ramps covered in 29mm hardwood with hydraulic width adjustment.
Two stage Gooseneck with chamfered approach and 29mm hardwood floor
Ramsey 24v 3600kg winch
Loading platform – High tensile steel ‘I’ beam main rails with Steel ‘I’ beam crossmembers at 450mm
centres. 7.93m long x 2.55 wide, covered in 44mm hardwood including timber over the wheels, with a nominal Laden height of 880mm.
Rear swing down loading support legs
ISO twist locks for 1 x 20ft or 2 x 10ft container
6 pairs of deck recessed centreline shackles
7 pairs of deck recessed outboard shackles
Full length side mounted D shackle tie downs – 12 per side
Full bed length rope cleats
Full bed length heavy duty chain down points – 8 per side
Full length retractable beam type outriggers
Full set of outrigger boards in integral stowage lockers
2 x Neck lockers
2 x Fire extinguisher holders
2240mm rear swing clearance.
Two speed Jost landing legs.
Wheels/Tyres – 215/75R 17.5 low profile tyres on 10 stud ISO spigot fixing
Brakes/Electrics – EC compliant 2 line braking with EBS.  24V ISO standard system wired via two 7-pin sockets. 1-15 pin socket supplemented with NATO lighting system.
Beacon and DIN socket as standard.

Plating Data at 56mph (90kph)
Gross trailer weight 38,000kg
Axle capacity 8,000kg
Kingpin loading 14,000kg
Approx. tare weight* 8,000kg
Payload (approx.) 30,000kg

Dimensions are:
Height: 1.25m to neck
Length: 13.5m Ramp to neck
Width:  2.54m (3.04m with outriggers)

Viewing is highly recommended prior to purchase and if you would like to arrange an appointment to view then please contact the Sales Team on 01476 861361.

Direct Sales

For further information, please enter your details below;

* = Required Field

Download PDF Download a PDF of this item.